| Home | Contact Us |
Our Products     Dry/Solid Lubricants  Tungsten Disulfide    Properties    Applications    WS2 versus MoS2    WS2 Brochure    MSDS WS2  Hex-Boron Nitride    Properties    Applications    hBN Brochure    MSDS hBN  Nano Lubricants    Lubricant Additives    Lubricant Powders     Grease with WS2  High Temp Grease    Properties    HT Grease Brochure    MSDS HT Grease  Low Temp Grease    Properties    LT Grease Brochure    MSDS LT Grease  Coolqueen LT Grease    Properties    Coolqueen Brochure    MSDS Coolqueen     Pricing    Tungsten Disulfide    hBN   Grease H/L Temp     Buy your Trial sample today!       site design: omesacreative.ca	MK-WS2-LT: Grease for Low Temperature Application:   Range: -60º C(-76º F) to 200º C(392º F) Made with Low Solidifying Synthetic Base Oil, Tungsten Disulfide particles and Special additives. The Grease has Dropping Point of 250º C.   The Grease has: Lowest Coefficient of Friction. Does not solidify at low temperatures. Excellent grease for High Load, Impact Load, High Shear applications. Excellent EP properties due to Tungsten Disulfide particles.   Technical Specifications   Test Typical Data Test Method Cone Penetration (NLGI class) #0, #1, #2 ASTM D217, GB/T269 Infilteration Degree(.01mm) 310-340,259-265,220-250 ASTM D217, GB/T269 Dropping Point (º C) 250º C ASTM D2665, GB/T3498 Steel Net Oil Separate (100º C, 24h)% < 0.3 ASTM D1742-94, SH/T0324 Corrosion (T2Sheet Copper, 100º C, 24h) No Color Change (Copper does not change or turn green) ASTM D4048, GB/T7326(II) Vapor Quantity (150º C, 22h)% < 0.4 ASTM D972-86, SH/T0337 Drip Wastage (38º C, 1h)% < 3.5 ASTM D1264, SH/T0109 Four-ball Test PB(N) >= 800x9.8 >= 114x9.8 ASTM D2596-87, GB/T3142 Coefficient of Friction 0.025   Free Alkali NaOH% < 0.05 SH/T0329   The Grease is available in 14 Oz (400 gm) Cartridges, 1KG (2.2 lbs) and 18 KG (40 lbs) packing